Products for Glass Container and Glass-ware İndustries
- Products for Cold End Coating
- Products for Hot end Coating
- Products (alkaline and acid base) for Cleaning of Molds in Ultrasonic Immersion System
- Products for Corrosion Protection and Coating of Molds
- Products for Cleaning Molds Used Manufacturing Glass-ware
- Products for Cleaning Glass Production Machines
- Stripping of Epoxy Coating on Delivery Sytem
- Special Lubricans for Glass Container and Ware Production
- Glass Coating Products
*
PC3+ COLD end COATİNG
Lost-lasting Cold-end Coating
Excellent wet and dry strach resistance during tranportation, filling and other porsess (slip angle:13) PC3 is diluted with soft or deionised water ( A dilution ratio 1/100) and sprayed with suitable spray system. the basis for optimum performance of cold end coating is hot end coating with tin oxide layer 35 CTU minumum and glass container are above 100 C in temperature
*
PC3 COLD END COATİNG FOR GLASS-WARE
Excellent wet and dry strach resistance düring transportation on conveyor. PC3 is diluted with soft or deionised water.( A dilution ratio 1/100)
*
PC4 Cold-end Coating
Cold end Coating product
Prior to decoration, application of cold end coating based on polyethylene may be caused on adhesion problems with the cured print. Aplication of PC4 or PC5 prevents of straches on conveyor.and adhesion problem . After printing PC3 must be applied.
*
PC5 Cold End Coating Prior UV Cured Print
*
ULTRASONİCS İMMERSİON CLEANİNG SYSTEM FOR MOULDS
ULTRASONİCS İMMERSİON CLEANİNG SYSTEM OFFER A RAPİD AND EFFECTİVE METHOD OF CLEANİNG FOR MOULDS
ULTRASONİC CLEANİNG USES HİGH-FREQUENCY SOUND WAVES TO REMOVE MOLD RESİDUES
DUE TO İTS PENETRETİNG NATÜRE, ULTRASONİC CLEANERS REMOVES RESİDUES FROM DEEP DOWN İNSİDE THE İNTERNAL COOLİNG PORTS AND CHANNEL, SPEEDLY REMOVES METARİAL DEPOSİTS AND RELASE AGENTS
ULTRASONİC CLEANER HAS 5 TANKS. 1.TANK CONTAİNS ALKALİNE CLEANER, 2.TANK CONTAİNS WATER FOR RİNSİNG. 3. TANK CONTAİNS ACİDİC CLEANER, 4.TANK CONTAİNS MİLD ALKALİNE CLEANER 5. TANK CONTAİNS PASSİVATİNG CHEMİCALS.
BLAST CLEANİNG AND ULRASONİC CLEANER SOULD NOT BE USED CONSECUTİVELY.BECAUSE SURFACE ROUGHNESS OF MOLD İS BROKEN
AND MOLDS ERODE
*
ALKALİNE SOLUTİONS FOR ULTRASONİC İMMERSİON CLEANER OF MOULD
STC-D320 AND STC-D210
STC-D320 İS HİGHLY ALKALİNE SOLUTİON STC-D210 MİLD ALKALİNE SOLUTİONS FOR REMOVİNG CONTAMİNANTS, HEAVY GREASE ON MOULD
ACİDİC SOLUTİON FOR İMMERSİON CLEANER FOR MOULD
MC-110
THE PRODUCT CONTAİNS SUFFİCİENT PROPORTİON OF CORROSİON İNHİBİTOR
*
STC-D-010
PROVİDES TEMPORARY CORROSİON PROTECTİON
*
SG201
PROVİDES LONG-TERM CORROSİON PROTECTİON
*
MOLD COATİNG PRODUCTS
*
PRODUCTS FOR CLEANİNG MOLDS USED MANUFACTURİNG GLASS-WARE
APPROPRİATE PRODUCT CAN BE SELECTED FROM PRODUCTS WİTH THE PRODUCT CODE STC
*
PRODUCTS FOR CLEANİNG GLASS PRODUCTİON MACHİNES
PC-LB100 İS APPROPRİATE PRODUCT
*
STRİPPİNG OF EPOXY COATİNG ON DELİVERY SYSTEM
STC-D811 AND STC-D822 CODED PRODUCTS ARE USED
*
COOLİNG LUBRİCANT FOR SHEAR BADES
MOLD LUBRİCANT SCOPP AND DELİVERY OİL
*
SLİDERS FOR MOLDS İN GLASS-WARE PRODUCTİON
PC-LB100
*
*
PRODUCTS FOR COATİNG ON GLASS
PC-470, PC-471, PC478, PC-479
HYDROPHOBİC , HYDROPHİLİC COATİNG PRODUCTS
CLEANİG PRODUCTS FOR GLASS (PC470,PC471)
CLEANİG PRODUCTS FOR GLASS (PC470,PC471)
HYDROPHİLİCS (PC478,PC479)
HYDROFOBİCS (PC475,PC476,PC477)
THEY ARE RETATDER OF DİRTY SURFACE FORMATION
*
Protective Film
PC-40
water based peelable film
*